Need help?Do you have a question about the TESTO Next-Gen 300 and is the answer not in the manual?
General| Weight | 1.2 kg |
|---|---|
| Dimensions | 240 x 85 x 65 mm |
| Protection class | IP40 |
| H2-compensated CO sensor | Yes |
| Display | 5-inch touchscreen |
| Connectivity | Bluetooth, WLAN |
| Operating temperature | -5 to +45 °C |
| Measuring range O2 | 0 to 21 % |
| Measuring range CO | 0 to 4000 ppm |
| Measurement Parameters | O2, CO, Temperature, Pressure, Draft |
Information regarding hazard symbols and precautionary measures for safe operation.
Detailed overview of the instrument's front panel and its components.
Identification and explanation of various connection ports on the instrument.
Initial setup and preparation steps for the measuring instrument.
Information on charging and using the instrument's power supply.
Procedure for powering the instrument on, off, and managing standby modes.
Instructions for connecting flue gas probes and temperature adapters.
Guidance on establishing wireless connections with Smart Probes and the testo Smart App.
Description of the graphical interface of the testo Smart App.
Steps for establishing an initial connection between the instrument and the app.
Procedure for initiating and managing a measurement using the app.
Overview of the instrument's main display and user interface elements.
Configuration and usage of the list-based data display.
Configuration and usage of the graphical data display.
Explanation of the main menu structure and available options.
Creating, editing, and managing customer and site information.
Configuration options for instrument settings like country, language, and connectivity.
Accessing support resources, tutorials, and device registration.
Steps to take before starting a measurement, including checks.
Procedure for zeroing gas and pressure sensors.
Introduction to the various measurement types supported by the instrument.
Detailed guide for performing flue gas analysis measurements.
Procedure for measuring the difference between two temperatures.
Explanation of the various measurement options and settings available.
Customizing the display of measurement parameters and units.
Manual procedure for zeroing the instrument's gas sensors.
Information on accessing, saving, and managing measurement protocols.
Information on recommended annual service checks by authorized centers.
Details on instrument calibration and maintaining accuracy.
Procedures for checking sensor status and error lists.
Instructions for cleaning the external housing of the instrument.
Procedure for emptying the condensate container.
Steps for safely opening the instrument for maintenance.
General information and slots for replacing sensors.
Step-by-step guide for replacing the O2 sensor.
Procedure for replacing CO, H2, and NO sensors.
Instructions for cleaning the modular flue gas probe.
Procedure for replacing the thermocouple in the probe.
To Next Page
