Need help?Do you have a question about the TESTO 300 M-I and is the answer not in the manual?
General| Battery Life | Up to 10 hours |
|---|---|
| Protection Class | IP40 |
| Product Type | Combustion Gas Analyzer |
| Resolution | O2: 0.1 % O2, CO: 1 ppm, NO: 1 ppm, Temperature: 0.1 °F/°C, Draft: 0.004 inH2O / 0.01 hPa |
| Accuracy | O2: ±0.2 % O2, CO: ±20 ppm (0 to 400 ppm), ±5 % of reading (401 to 2000 ppm), NO: ±5 ppm (0 to 100 ppm), ±5 % of reading (101 to 300 ppm), Temperature: ±0.9 °F / ±0.5 °C, Draft: ±0.012 inH2O / ±0.03 hPa |
| Operating Temperature | -5 to +45 °C |
| Storage Temperature | -20 to +60 °C |
| Power Supply | Rechargeable lithium battery |
| Draft measurement range | -16 to +16 inH2O (-40 to +40 hPa) |
Important safety and operational warnings for the analyser and its components.
Diagram of the analyser, keyboard functions, and basic operation.
Details on power supply, battery recharging, and operation.
Overview of the analyser's menu structure and navigation flow.
Gas path functions, compact gas drier, and SO2 preparation unit.
Measuring flue gas, ambient air temperature, and flue gas components (O2, CO2, CO, NO, SO2).
Procedures for differential pressure, velocity, dew point, and leak detection.
How to save and print measurement results and manage data.
Creating, selecting, saving, viewing, and deleting measurement designators and data.
How to select and configure fuel types and their associated factors.
Customizing display, units, date/time, printer, light, and CO2/NO2/Dew Point/Mass Flow settings.
Setting limits to automatically switch off the pump to protect measuring cells.
Viewing operating values and procedures for deleting analyser memory.
Guide for cell recalibration and setting PC data transfer baud rate.
Instructions for cleaning condensate traps, probes, and replacing thermocouples.
Procedures for changing filters, measuring cells, and batteries.
Procedure for recalibrating the CO, NO, and SO2 measuring cells.
Equations for calculating CO2, flue gas loss, volume flow, efficiencies, and conversions.
Common error messages and their causes and remedies.
Detailed specifications for measurements, components, and general analyser data.
Details on the attachable printer and testo Economical software.
Ordering information for probes, gas preparation units, and related accessories.
To Next Page
