Need help?Do you have a question about the TESTO 310 II and is the answer not in the manual?
General| Resolution Draft | 0.01 hPa |
|---|---|
| Resolution Temperature | 0.1 °C |
| Operating Temperature | -5 to +45 °C |
| Protection Class | IP40 |
| Product Type | Flue Gas Analyzer |
| Gas Sensors | O2, CO |
| O2 measurement range | 0 to 21 % O2 |
| CO measurement range | 0 to 4, 000 ppm CO |
| Accuracy O2 | ±0.2 % O2 |
| Accuracy Draft | ±0.03 hPa |
| Resolution CO | 1 ppm |
| Storage Temperature | -20 to +50 °C |
| Display | Graphic display |
| Interfaces | Bluetooth |
Details different warning levels and pictograms for safety.
Provides essential safety guidelines for operating the instrument.
Hazards and safety precautions related to the device's battery.
Details specific product features and potential hazards like magnetic fields.
Identifies and labels the main components of the testo 310 II device.
Details the components and usage of the flue gas probe.
Describes the function of each control key on the instrument.
Instructions for charging the instrument's battery safely and correctly.
Steps for initial setup and configuration of the instrument.
How to access and modify settings after initial setup.
Explains the zeroing process for gas and pressure sensors.
Safety warnings and instructions for using the flue gas probe.
Steps to select the correct fuel type for accurate measurements.
Performing differential pressure measurements using the Smart App.
Performing flue gas measurements using the Smart App.
Details the measurement ranges, resolution, and accuracy of the instrument.
Explains how to interpret and act on error messages displayed by the unit.
To Next Page
