TESTO 310 II - System Requirements; Operating System; Procedure

9 Smart App
59
9.9.1 System requirements
Administrator rights are required for installation.
9.9.1.1 Operating system
The software can be run on the following operating systems:
• Windows
®
7
• Windows
®
8
• Windows
®
10
9.9.1.2 PC
The computer must meet the requirements of the operating system in each
case. The following requirements must also be met:
• Interface USB 2 or higher
• DualCore processor with minimum 1 GHz
• Minimum 2 GB RAM
• Minimum 5 GB available hard disk space
• Screen with a resolution of at least 800 x 600 pixels
9.9.2 Procedure
✓
To transfer the data from the App to testo DataControl, both
instruments must be in the same network.
For example: A notebook with installed testo DataControl and a
smartphone with installed testo Smart App are connected to the same
WLAN.
1
Open testo Smart App on the smartphone or tablet.
2
Open the testo DataControl archiving software on the PC.
3
Click on Select instrument.