TESTO 310 II - Using the product; Performing settings; Instrument configuration menu; commissioning

8 Using the product
16
8 Using the product
8.1 Performing settings
The instrument has two different configuration menus. The menu that is opened
depends on the instrument status when called up.
8.1.1 Instrument configuration menu /
commissioning
When the instrument is switched on initially, the configuration menu is opened
automatically.
Making settings
1
Switch the instrument on:
Hold down [ ], until the menu
Instrument Setup is shown.
2
Use [▼] and [▲] to select the
desired country and confirm the
selection with [MENU/ENTER].