Need help?Do you have a question about the TESTO 350 XL and is the answer not in the manual?
General| Resolution CO | 1 ppm |
|---|---|
| Resolution NO | 1 ppm |
| Resolution SO2 | 1 ppm |
| Data Logging | Yes |
| Measurement Parameters | O2, CO, NO, NO2, SO2 |
| Measurement Range O2 | 0 to 25% |
| Measurement Range CO | 0 to 10000 ppm |
| Measurement Range SO2 | 0 to 5000 ppm |
| Accuracy O2 | ±0.2 vol. % |
| Accuracy CO | ±5% of mv or ±10 ppm |
| Accuracy NO | ±5% of mv or ±5 ppm |
| Accuracy NO2 | ±5 % of mv |
| Accuracy SO2 | ±5% of mv or ±5 ppm |
| Temperature measurement range | 0 to 1, 200°C |
| Display | LCD |
| Operating Temperature | -5 to 45°C |
Details risks for persons, system, and instrument, and necessary precautions.
Instructions for connecting the mains adapter or rechargeable battery to the analyser box.
Guides on powering the control unit using mains unit, batteries, or rechargeable battery.
Connecting units and probes for a spot measurement.
Instructions for conducting a leak test on the sampling probe and gas paths.
Guides on starting, halting, and saving measurements.
Instructions for programming starting criteria, measurement rate, and end criteria.
Confirming, starting, stopping, and restarting programmed long-term measurements.
To Next Page
