TESTO 174 - Connecting data logger to PC

4 First steps
26
Pos: 21 /TD/Erst e Schritte/testo 174- neu/Datenlogger an PC ansc hließen Hardware @ 5\mod _1263211400814_79.doc @ 54217 @ 2 @ 1
4.3. Connecting data logger to PC
1. Install testo ComSoft software.
The software is available in the Internet as a free download
requiring registration: www.testo.com/download-center.
The instructions for the installation and operation of the
software can be found in the testo ComSoft instruction
manual that is downloaded together with the software.
The software can be ordered on CD (article no. 0572 0580)
if the download from the Internet is not desired.
2. Connect the connecting cable of the interface to a free USB
interface on the PC.
3. Slide the data logger into the bracket of the interface.
4. Configure data logger, see separate testo ComSoft instruction
manual.
Pos: 22 /TD/Produk tbeschreibung/ Übersicht/testo 174-ne u/Anzeige- und Bediene lemente, Display @ 5\ mod_1263213777144_79. doc @ 54412 @ 12 @ 1