TESTO 410-1 - Instrument Operation and Settings; Basic Device Configuration; Instrument Power and Display Control; Display Mode and Value Calculation

Short manual testo 410-1 11
Short manual testo 410-1
 Protection cap: Park position
 Impeller
 Temperature sensor
 Display
 Control keys
 Battery compartment (on rear)
Basic ssettings
Instrument off >press and hold 2s > select with ( ),
confirm with ( ):
Unit of temperature: °C, °F > Unit of velocity: m/s, km/h, fpm, mph, kts, Beau >
Auto off-Funktion: OFF, ON
Switching tthe iinstrument oon
Press .
Switching tthe ddisplay llight oon ((for 110s)
Instrument on > press .
Select ddisplay ssize
Instrument on > select with :
Velocity, chill temperature ( )
Select ddisplay mmode
Instrument on > select with :
Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum
values > Hold Avg: Timed mean value calculation, see below
Timed mmean vvalue ccalculation ffor fflow
Press several times, until
Hold and Avg appear > Hold down
until
---- appears > Releasing starts mean value calculation,
the current readings are displayed > End measurement: press
,
the mean value is displayed.
Switching tthe iinstrument ooff:
Instrument on > press and hold 2s.
de
en
fresitptsvnl????