Using the product 15
3 Press ( ) to confirm the input.
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.
Using the product
To ensure correct readings, align the instrument so that it has
its back to the flow.
²
Switching tthe iinstrument oon:
i Press .
- Measuring mode is opened.
²
Switching tthe ddisplay llight oon:
The instrument is switched on.
i Press .
- The display light goes out automatically if no key is
pressed for 10 seconds.
²
Changing tthe pparameter:
The parameter in the top display line can be changed. The
bottom display line always shows the temperature.
Adjustable parameters
· Velocity
· Wind chill temperature ( ): perceived temperature (only deviates from
ambient temperature at temperatures <10°C / <50°F and wind speeds
>1.34m/s / >264 fpm)
i Press several times until the desired parameter appears.
²
Changing tthe ddisplay vview:
Adjustable views
· Current reading
· Hold: Readings are held.
· Max: Maximum values since the instrument was last switched on or last reset.
· Min: Minimum values since the instrument was last switched on or last reset.
· Hold Avg: Timed mean value calculation, see below.
i Press several times until the desired view appears.
de
en
fresitptsvnl????
To Next Page
