TESTO 420 - Transferring Measurement Data to the PC

7 Using the product
22
Delete folder
1. Using the arrow keys, navigate to the required folder and press
.
2. Select the menu item Delete Folder and confirm with .
- The folder that you want to delete is shown on the display.
3. Confirm once again with in order to delete the folder,
or cancel by pressing Esc.
Set as Logging Folder
This setting establishes which folder is to be specified as the
standard storage location for saving the measurements.
The folder which is set as the standard storage location is
marked in black.
1. Using the arrow keys, navigate to the required folder and press
.
2. Select the menu item Set as Logging Folder and confirm with
.
- The selected folder is set as the standard storage location.
- The stored location can be changed during the saving process.
Total Volume Flow
If data from single measurements is saved within a folder,
the total volume flow of all measurements can be
displayed using this function.
1. Using the arrow keys, navigate to the required folder and press
.
2. Select the menu item Total Volume Flow and confirm with .
- The single measurements and the total volume flow are
displayed.
3. Press .
- The result of the total volume flow is saved.
7.6. Transferring measurement data to the
PC
No Bluetooth connection is possible while there is a
connection to the PC. The existing Bluetooth connection is
aborted.