TESTO 445 - 3 Location Selection

The location names Location 1 to 99 are specified by the factory.
Additional location names (8 characters) can only be loaded onto
your instrument using PC software.
/ Select location
14
3. Location selection
58.06
21.80
1:
1:
M.05
MAN
N.0017
m/s
hPa
1. Current
measurement
01
Location
Duct 1
50.0
A
cm
50.0
B
cm
EESSCC
LLooccaattiioonn
or :
From now on all measured data which is saved or printed is
linked to the selected location or product names.
The cross-section
can only be called up if
volume flow is activated
(testo 445 instrument)
Increase value
Use ESC to go to
selection of cross-
section entry
, AxB, m2, Funnel)
Decrease value
Select digit box
Increase value
Decrease value
Select digit box
Return to current
measurement
ESC
Location