TESTO 480 - Using the product; 6.1. Performing settings; 6.2. Setting the measurement display; 6.2.1. Calculated measurement parameters

0 Performing a measurement
5
Performing a measurement
All steps for carrying out a sample measurement are set out below.
The individual setting options and a detailed description of the
various measurements can be found in the testo 480 instruction
manual.
Saving current measuring values of a probe
1. On the tab of the relevant probe, select [] → Quick back-up.
- The protocol is located under [] → Default point → Quick
back-up
If several measurements are saved, the protocols appear
one below the other, sorted according to date.
Protocols can also be saved under a specific measuring
location (client) and measuring point.
(See testo 480 instruction manual, chapter "Saving
measurement data".)