6 Using the product
18
for this (recommendation: NTC air probe, art. no. 0613
1712). Information about the temperature-compensated
differential pressure and about the temperature at the
beginning/end of the test exists as a result. If no
temperature probe is connected, the tightness test can
be performed without temperature compensation.
1. Press [Mode] (leakage test view).
- Leakage test view is opened. ∆P is displayed.
2. Start the leakage test: Press [R, ►, ■].
3. End the leakage test: Press [R, ►, ■].
- Result is displayed.
4. Confirm message: Press [Mode].
Pos: 34 /TD/Übersc hriften/7. Produkt i nstand halten @ 0\mod_117 3789831362_79.doc x @ 397 @ 1 @ 1
To Next Page
Loading...
