TESTO 549 - 7 Maintaining the Product

7 Maintaining the product
19
7 Maintaining the product
Pos: 35 /TD/Produk t instand halten/Gerä t reinigen 5502 @ 17\mod_142 3131833893_79.doc x @ 207412 @ 2 @ 1
Cleaning the instrument
Do not use any aggressive cleaning agents or solvents!
Mild household cleaning agents and soap suds may be
used.
> If the housing of the instrument is dirty, clean it with a damp
cloth.
Pos: 36 /TD/Produk t instand halten/tes to 550/Instandhalten testo 550 @ 4\mod_12532622 26679_79.docx @ 50494 @ 5555 @ 1
Keeping connections clean
> Keep screw connections clean and free of grease and other
deposits, clean with a moist cloth as required.
Removing oil residues
> Carefully blow out oil residues in valve block using compressed
air.
Ensuring the measuring accuracy
Testo Customer Service would be glad to further assist you if you
so wish.
> Check instrument regularly for leaks (recommended: annually).
Keep to the permissible pressure range!
> Calibrate instrument regularly (recommended: annually).
Changing batteries/rechargeable batteries
✓ Instrument is switched off.
1. Fold out the suspension device, loosen the clip and remove the
cover of the battery compartment.
2. Remove empty batteries/rechargeable batteries and insert new
batteries/rechargeable batteries (4x 1.5 V, type AA, Mignon,
LR6) in the battery compartment. Observe the polarity!
3. Set on and close cover of the battery compartment (clip must
engage).
4. Switch the instrument on.