The affordable transmitters from the hygrotest 600
series have been developed for a wide variety of HVAC
applications but also for industrial drying processes, for
example. Depending on design the modular design
facilitates wall assembly, duct assembly as well as
measurements at inaccessible points (probe can be
attached to pipe).
The transmitters can be easily calibrated and adjusted
on-site via a control and adjustment set (see adjustment
guidelines). The user saves time and money when
assembling and installing thanks to the industrial
standard 4 to 20mA in 2 wire technology and the
variable assembly options (rail, wall, duct, separate
probes).
Advantages of hygrotest 600
Ideal price/performance ratio:
- Electronics immune to interference thanks to reverse
battery protection, overvoltage protection, EMC
compliance to industrial standards
- Electrical isolation
- Low installation and assembly costs thanks to
industrial 4 to 20 mA 2 wire technology
- Easy on site calibration and adjustment for humidity
and temperature via adjustment set
- LED display (optional)
- RS 485 Interface (optional)
Description of functions
4
To Next Page
Loading...
