TESTO Hygrotest 600 WHT User Manual

6
Version options
Analog output
B 1 4 to 20 mA (2-wire-technology)   
Probe Probe material stainless steel 1.4571  Probe material plastic   
C 1 Standard probe length incl. sensor protection filter 65 65 200 200 200 100 210 C 2 Special probe length, stainless steel incl. sensor protection cap........
DH -20/+120°C: min 100mm; PHT -20/+120°C: min. 150mm; max. 800mm 
C 3 Special probe length, plastic, 100 mm, incl. sensor protection cap 
Cable
D 1 Standard cable length 2 m  D 2 Special cable length up to tip of probe .......m (min. 250 mm; max.2 m) 
Adjustment
F 1 Humidity inaccuracy ±2 %RH   
Sensor protection caps
G 1 Stainless steel sintered cap   G 2 Wire mesh filter    G 3 PTFE sintered filter    G 4 Slid metal filter    G 5 ABS-cap slit   
Displays
H 1 Display double-spaced - loop feed with maximum load 50 Ohm    H 2 Display double-spaced - external supply with max. load 500 Ohm    H 3 Display double-spaced - with RS485 - no analog outputs possible    H 4 Display double-spaced - with RS485 -analog output possible    H 5 Display double-spaced with RS485 and 2x2 limit signal outputs - analog outputs possible   
600 DH
600 DHT
-20/70
600 DHT
-20/120
600 PHT
-20/70
600 PHT
-20/120
Order Code
600 WH
600 WHT
-20/70

TESTO Hygrotest 600 WHT Specifications

General

Brand	TESTO
Model	Hygrotest 600 WHT
Category	Measuring Instruments
Language	English