Preparation
Install the side brushes before use. Please note L and R should correspond to
each other when installing the side brushes.
Turn on the main power switch on the side of S5 .
Place the Charging Base on a hard, level surface and against a wall.
Do not place any objects within 1m. to the left / right and 2m. to the
front of the charging base, and do not place any mirrors or other reflective
objects within this range.
1
2
3
4
Remove the protective
film before use.
Remove before use
Preparation
18
1m
2m
1m
To Next Page
Loading...
