Need help?Do you have a question about the Tesvor Robot Vacuum and is the answer not in the manual?
General| Filter Type | HEPA filter |
|---|---|
| Connectivity | Wi-Fi |
| Runtime | 120 minutes |
| Dustbin Capacity | 600 ml |
| Control | App & Voice Control |
| Noise Level | 55 dB |
| Charging Time | 4 hours |
| Smart Home Integration | Amazon Alexa, Google Assistant |
| Compatible Floor Types | Carpet |
| Climbing Ability | 15 mm |
Critical safety warnings regarding device operation, handling, and environmental use.
Key attention points for safe operation, including handling, environment, and setup.
Compliance with FCC RF radiation exposure limits and safe installation guidelines.
Illustrates and names all parts of the robot vacuum, including host, charger, and accessories.
Details the physical and electronic specifications, attachments, and operation parameters of the robot vacuum.
Diagram and labels showing the location of buttons on the remote control.
Enters the smart cleaning mode.
Initiates automatic charging mode.
Control the robot's movement direction (forward, backward, left, right).
Pauses or resumes cleaning, or saves settings.
Adjusts the suction power level.
Enters the time setting mode.
Initiates cleaning for a single room.
Starts cleaning a specific fixed point.
Enters or saves reservation settings.
Initiates cleaning along the room's borders.
Allows switching between different suction levels.
Instructions on how to properly position the charging base for optimal performance.
Details on turning the machine on/off and its automatic sleep mode.
Step-by-step guide on how to charge the robot vacuum host.
Explains how the machine automatically returns to the charging dock.
Important notes and indicators related to the charging process.
Describes the different modes: Standby, Sleep, and Operating modes.
Overview of available cleaning modes: Smart, Fixed-point, and Edge sweeping.
Guidance on cleaning and replacing the side brushes.
Instructions for emptying and cleaning the dust container.
Steps for removing, cleaning, drying, and reinstalling HEPA and basic filters.
Instructions for cleaning electrode poles, sensors, and charging ports.
Lists common error messages, their failure causes, and recommended solutions.
Identifies components that can be replaced, such as the dust container and battery.
To Next Page
