Switching Modes
Standby Mode
The power switch is on, the A key is on, and the
machine is in a stationary state.
Sleep Mode
The power switch is on, the A key flashes, and the
machine is in a stationary state.
Operating Mode
The machine is in the working state, the A key is
lighting, and the machine turns into the cleaning mode.
Operating Procedures
Standby mode—Sleep mode—Operating mode
Booting
Make sure the power switch on the side of the machine is turned on. Press the
button of the machine or function mode key of remote control to start the work.
Suspend
When the machine is in operation, press the A key of the host or the B key of
the remote controller to stop working and press again to continue working.
Sleeping
The machine is in a stop condition and the key light is not on.
The machine goes into sleep when it is not operating for a short time. Press the
mode function key on the machine or the A key of the host to wake the machine.
To Next Page
Loading...
