What to do if my Tesvor Vacuum Cleaner M1 suddenly makes noise?
If your Tesvor M1 suddenly makes noise, it might be due to deformed side brushes or the rolling brush. To identify the source, remove the side brushes and the rolling brush separately to check if the noise persists. If the noise stops after removing one of them, replace the problematic accessory with a new one.
Why does my Tesvor Vacuum Cleaner M1 not perform cleaning work automatically as scheduled?
If your Tesvor M1 isn't cleaning automatically as scheduled, it could be due to a scheduling failure, especially if the robot was restarted after scheduling. To ensure proper scheduling, the remote control should be in a non-sleep state, and you should hear a voice prompt confirming the start and success of scheduling. Also, remember to reschedule the robot after powering it off.
How to fix abnormal movements of Tesvor Vacuum Cleaner M1?
If your Tesvor Vacuum Cleaner M1 is moving abnormally, it might be a software issue. Try cleaning the sensors carefully with a dry cloth. If the problem continues, restart the M1 by turning the power switch off and then back on.
Why do the side brushes on my Tesvor Vacuum Cleaner deform after the first use?
If the side brushes on your Tesvor Vacuum Cleaner deform when you start cleaning for the first time, it's likely that they are mounted in reverse. Ensure you install the side brushes correctly, matching them to the 'L' and 'R' markings on the device.
General| Dustbin Capacity | 600 ml |
|---|---|
| Charging Time | 4-5 hours |
| Noise Level | 65 dB |
| Cleaning Modes | Auto, Spot, Edge, Single Room |
| Smart Features | App Control, Voice Control |
| Weight | 3.5 kg |
| Connectivity | Wi-Fi |
| Mopping Function | Yes |
| Auto Recharge | Yes |
| Virtual Wall | Yes |
| Scheduling | Yes |
| Multi-floor Mapping | Yes |
| Filter Type | HEPA |
| Climbing Ability | 15 mm |
Provides essential safety guidelines for using the M1 robot and its accessories.
Highlights critical dangers and warnings related to battery handling and product use.
Details important attention points for safe operation and maintenance of the device.
Key recommendations for optimal performance and avoiding issues before starting operation.
Guides on installing accessories, powering on, and setting up the charging base.
Explains the meaning of different LED light patterns for machine status.
Details the procedures for charging the robot using different methods.
Covers wake-up, start, and pause functions for controlling the robot's operation.
Describes the different cleaning patterns: Smart, Spot, and Edge cleaning.
Instructions for setting the clock and scheduling automated cleaning tasks.
Illustrates and labels the top, side, and bottom parts of the M1 robot.
Step-by-step guide on how to clean the main rolling brush.
Instructions for cleaning the robot's side brushes to remove tangled hair and dirt.
Guide on how to clean the dust box and its filters for optimal performance.
Instructions for removing and attaching new side brushes when they are bent or damaged.
Procedure for cleaning drop sensors and charging terminals for best performance.
To Next Page
