What to do if my Tesvor Vacuum Cleaner X500Pro is making noise?
If your Tesvor X500Pro is suddenly making noise, the side brushes or rolling brush may be deformed. To identify the source, remove the side brushes and the rolling brush separately to see if the noise persists. If it does, replace the problematic accessory with a new one.
Why is my Tesvor Vacuum Cleaner X500Pro moving abnormally?
Abnormal movements of the Tesvor X500Pro may indicate a software issue. Clean the sensors carefully with a dry cloth and restart the X500Pro by turning the power switch off and back on.
Why are the side brushes on my Tesvor Vacuum Cleaner deforming?
If the side brushes on your Tesvor vacuum cleaner are deforming, it's possible they are mounted in reverse. Check the marks 'L' and 'R' on the device and install the side brushes correctly.
Why Tesvor Vacuum Cleaner X500Pro doesn't work for 100 minutes?
Your Tesvor X500Pro not working for the full 100 minutes is normal. The robot intelligently determines when it has completed the cleaning and returns to its charging base.
General| Dustbin Capacity | 600ml |
|---|---|
| App Control | Yes |
| Cleaning Modes | Auto, Spot, Edge, Single Room |
| Mopping Function | Yes |
| Auto Recharge | Yes |
| Multi-floor Mapping | Yes |
| Filter Type | HEPA |
| Weight | 3.5kg |
| Connectivity | Wi-Fi |
| Voice Control | Yes |
| Virtual Walls | Yes |
To Next Page
