Name: Tetra EasyCrystal FilterBox 300
Brand: Tetra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Dear customer,

With the purchase of the Tetra

EasyCrystal

FilterBox you have

chosen high quality and comfort

from Tetra. A good choice.

In combination with a heater, the

modern system you have acquired

represents an allround technical

solution.

By its excellent mechanical, bio-

logical and chemical ﬁltration the

Tetra

EasyCrystal

Filter provides

for crystal clear, healthy water. The

maintenance of the EasyCrystal

Filter is extremely easy: No need

to rinse out the ﬁlter media, no wet

hands!

Before you start operation of your

new ﬁlter please read the instruc-

tions. Enjoy your Tetra

EasyCrys-

tal

FilterBox.

Tetra

EasyCrystal

FilterBox

A. Tetra

EasyCrystal

FilterBox 300

B. Tetra

EasyCrystal

Filter 250

C. Suction Cups for all other

aquarium types except for

Tetra AquaArt

D. Filter cartridge

(EasyCrystal

FilterPack)

E. Filter foam

(EasyCrystal

Filter

BioFoam)

F. Bio Filter Balls

G. Tetra

Heater HT50*

H. Motor Housing

* is included in the purchase of a Tetra AquaArt

aquarium; otherwise available individually at your

local retailer

Handling

Installation and Operation

Unpack a ﬁlter cartridge and place

it together with the ﬁlter foam as

shown in picture 1.

Attention: The green side of the ﬁlter

cartridge has to point at the front side

of the ﬁlter. The front side of the foam

grid is marked with „Front“ and should

point at the front side of the ﬁlter.

When using a Tetra AquaArt

Aquari-

um, the Tetra

EasyCrystal

FilterBox

is ready to slot into the side of the

aquarium (picture 2).

For all other aquarium types please

use the enclosed suction cups, at-

taching them as shown in pictures 3

and 4.

The outlet of the ﬁlter should be

placed above the water surface.

The distance between ﬁlter and the

gravel on the bottom of the aquarium

should at least amount to 2.5 cm (pic-

ture 5). If you have placed plants or

other objects in the aquarium the dis-

tance to the ﬁlter housing should be

at least 1.5 cm.

Now place a suitable heater into the

intended compartment. Attach the

enclosed clip to the heater and slide

this along the rail to the FilterBox.

(see picture 6)

We recommend using the precise

Tetra

Heater HT50. A Tetra

HT50

is already included in the Tetra

AquaArt

(60 l) aquarium.

Care and Maintenance

For crystal clear water the

ﬁlter cartridge (EasyCrystal

Filter-

Pack) should be replaced every 4

weeks.

In order to change the EasyCrystal

FilterPack cartridge (D) unplug the

power plug, simply replace the car-

tridge and plug in the ﬁlter again.

That’s it! (see pictures 7 and 8)

EasyCrystal

FilterPack replace-

ment cartridges are available at

your local retailer.

If you add remedies for the ﬁsh into

the water please use an EasyCrys-

tal

FilterPack cartridge without

activated carbon, as activated car-

bon absorbs most remedies. These

ﬁlter cartridges are available at

your local retailer.

TH50781_GA_FilterBox_300_IN_2010.indd 4 02.07.10 11:30

Brand	Tetra
Model	EasyCrystal FilterBox 300
Category	Water Filtration Systems
Language	English

Tetra EasyCrystal FilterBox 300 Manual

Table of Contents

Other manuals for Tetra EasyCrystal FilterBox 300

Questions and Answers:

Tetra EasyCrystal FilterBox 300 Specifications

Related product manuals