Tetra EX 600 Plus - Servicing the O-ring; Technical data; Warranty; Manufacturers address

English translation of the original German instructions
20
Servicing the O-ring
 If the O-ring (37) is damaged, replace it.
 Clean the O-ring with warm tap water.
 Make sure that the O-ring rests snugly against the
motor head in all positions.
Cleaning the foam pre-filter
 When the foam pre-filter (18) is heavily soiled,
clean it with clear water.
Storing the filter
 Pull out the mains plug.
 Remove the water from the filter.
 Store the filter in a dry place.
Disposing of the filter
 Please contact your local authority for the relevant
information on disposal.
 Dispose of the filter in accordance with the
regulations.
Technical data
External filter EX
EX 600
Plus
EX 800
Plus
EX 1200
Plus
Water flow (l/h)
630
790
1300
Suitable aquarium -
size (l)
60–120
100–300
250–500
Filter capacity (l)
5.7
6.6
12.0
Filter baskets
(quantity)
3
4
4
Hose internal -
diameter (mm)
12
12
16
Voltage
230 V ~ 50 Hz
Energy consumption
(W)
7.5
10.5
19.5
Energy consumption
(W) configured
5.5
7.6
15.5
Length of connection -
cable (m)
1.65
Warranty
We grant a three-year warranty, starting from the
date of purchase. Please keep your receipt! No
claims may be made on the warranty in cases of
improper use and tampering with the equipment, nor
does the warranty cover normal wear and tear.
Please contact your local stockist or Tetra GmbH if
you have a complaint.
Manufacturer's address
Tetra GmbH,
P.O. Box 1580
D-49304 Melle
www.tetra.net