6 • Teufel Streamer
Preparations
Setup
To be able to integrate Teufel
Streaming products with Raumfeld
technology in your network and
to ensure smooth operation, we
recommend an up-to-date, high
performance router with a broadband
Internet connection.
Make sure that the Wi-Fi router is
active, has the latest firmware and is
able to access the Internet.
To the extent possible, the router
should be positioned in the middle
of your home in order to ensure an
adequate Wi-Fi signal throughout
your home.
• Set up the Teufel Streamer in the
desired location and connect it to
the mains supply with the mains
adapter.
• If desired, connect your peripheral
devices.
– Digital external player:
Via
TOSLINK cable to OPT IN (13).
– Analogue external player: Via
RCA cable to LINE IN (15).
– Digital amplifier: Via TOSLINK
cable to OPT OUT (14).
– Analogue amplifier:
Via RCA cable
to LINE OUT (16).
The device must be
switched on (LEDs light up)
so that the signal is played back.
To switch to LINE IN or OPT IN, tap
the control button (8).
If there is an optical and
analogue signal at the same
time, the optical signal will have
priority.
To Next Page
Loading...