Tevion 43744 - Page 14

14
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support www.quesh.co.uk
Model Number: 43744
Radio Operation
1.AF-Alternative Frequency
Press the AF button so that the unit
will choose the strongest FM signal
for the selected station, so that you
do not have to re-tune the stations
when driving between different
transmitter coverage areas. When
AF is on, it means RDS information
is received; when AF is flashing, it
means RDS information is not yet
received.
2. TA - Traffic Anouncement
Press the TA button so that the unit
will be activated for reception of
traffic announcement from local radio
stations.
To choose the TA mode, press the
sound select button for 2 seconds, the
display will show TA SEEK. Rotate the
encoder volume to choose between
the TA SEEK and TA ALARM, after
chooisng, please leave the unit idle
for the mode to activate. In TA SEEK
mode, the unit will seek for traffic
announcement programme when
TA is pressed; in TA ALARM mode, no
TA/TP is displayed and the alarm is set
off.
3. PTY - Programme Type
This radio will allow you to select the
type of programme required, and will
search for a station broadcasting that
type of programme. Press the PTY
button once to show the music type.
Then press 1-6 button to choose the
different music types available.
Press the PTY button twice to show
the speech type programme. Then
press 1-6 button to choose the
different speech type programme.
Each number key will show 3 different
speech programme for you to choose.
4. MASK DPI - MASK ALL
Press the sound select button for 2
seconds, the display will show TA SEEK.
Press the sound select button again
so that the unit will show MASK DPI.
Rotate the encoder volume to toggle
between MASK DPI and MASK ALL
mode. Then leave the unit idle for the
mode to take effect. During MASK DPI
mode, the unit will mask only the AF
which has different PI, this is the default
mode; during MASK ALL mode, the
unit will mask the AF which has
different PI and no RDS signal with
high field strength.
5. RETUNE S/L - SHORT/LONG
This function is to set the initial
duration of automatic TA Search -- Press
and hold the sound select button until
“TA SEEK” is shown on the LCD, then
press the SEL button to cycle through
the menu selections until “RETUNE_S”
is shown, Rotate the encoder volume
to choose “RETUNE_S” or “RETUNE_L”.
The default is “RETUNE_S”.
RDS Operation
RDS-EON CONTROL
This unit is equipped with the latest
technology of EON control, so that
when you are listening to Radio or CD,
and there is a travel announcement
from a nearby local station, the radio
will already know the frequency of
that radio station. Then it will receive
the station, turn up the volume, or
interrupt the playback of the music for
the duration of the announcement. At
the end of the announcement the
radio will return to its previous state
ready for the next announcement.