Tevion 43744 - Radio Operation; Radio Tune; Seek Function; Tuning

13
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support www.quesh.co.uk
Model Number: 43744
1. Choose Radio Band
Press the MODE Button to access the
radio function.
The unit comes with five bands - three
FM Bands (FM1, FM2, and FM3) and two
MW Bands (MW1, and MW2) selects.
Each of the five bands can store up to
six preset stations, for a total of 30 preset
memory stations.
2. Radio Tune / Seek Function
In Radio Mode, press and hold the
SEEK |<< or >>| Button for 2 seconds,
and the display will show”MANU SEEK”.
Press the SEEK |<< or >>| Button once to
manually adjust the radio frequency.
3. Tuning
Press the SEEK |<< or >>| Button once
and the radio will seek the next strong
and clear frequency station. Repeat to
seek more stations in your listening
area with a strong signal.
4. Mono / Stereo Reception Control
In FM radio mode, press the SEL button
repeatedly until the display shows
“STEREO” or “MONO”. Turn the volume
knob to change between STEREO or
MONO. Improvement of reception of
distant stations can be done by selecting
“MONO” operation which may cut down
some reception noise.
5. Save Your Preset Stations
There are six numbered preset buttons
which can store and recall stations for
each band. While listening to a radio
station you would like to save as a
pre-set, press and hold one of the
buttons numbered 1-6 until you hear
a beep. The button you pressed is now
the pre-set button for that station.
6. Automatic Store / Preset Scan
There are six numbered preset stations
which can store and recall stations for
each band. While listening to a radio
station you would like to save as a
preset, press and hold one of the
buttons numbered 1-6 until the number
of the radio change to the number
you selected. The button you pressed
is now the pre-set button for that
station.
A. Automatic Scan & Store
While listening to the FM radio, press
and hold the F/PS Button. The receiver
will automatically scan and save stations
of the 3 FM Bands.
While listening to the MW Radio, press
and hold the F/PS Button. The receiver
will automatically scan and save
stations of the 2 MW Bands.
B. Scan & Preview Saved Stations
Press the F/PS button once, the receiver
will scan the radio stations in the current
band.
Radio Operation