15
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support www.quesh.co.uk
Model Number: 43744
1. Pairing
Press and hold BND/ID3/TEL button
until the word “PAIRING” blinks on
the display waiting for the bluetooth
device to connect.
At this blinking time, please run the
bluetooth search and connect function
in your mobile phone. The car radio
model no “BT Car Stereo” will be shown
on the mobile phone . Select this car
radio and connect. When you are asked
for a connection password, please
input “0000” in your mobile phone to
finish the pairing, there is “PAIR OK” to
show on the LCD. Then the bluetooth
icon will be shown on the car radio LCD
indicating that the bluetooth function
is ready to use.
2. Dial
Press and hold BND/ID3/TEL button
enter PHONE mode, you could dial
telephone number “ 0-9, *,# ” button
on the remote control.
You could turn VOL+/- to setup the
speaker volume during you are on the
phone.
3.Call Record
After Connection with mobile phone,
under PHONE mode, then press SEL
button and display until show DIAL( 8
recent dialed number).
Press the SEL button again, RECV ( 8
recent received number) will show.
Press the SEL button again, MISS (5
recent missed number) will show on
the display.
In each category, press |<< and >>|
to view the saved telephone number.
4. Disconnection
Press and hold MOD / “Answer”
button (with green phone logo), it
will disconnect the phone.
When you press and hold MOD/“Answer”
button(with green phone logo) again,
it will connect the phone.
5. Answering/Rejecting call
When there is phone calling in, press
the MOD/“Answer” button(with green
phone logo) anytime to receive a call in
your car radio. If you want to reject the
call, press F/PS/ “REJECT” button(with
red phone logo).
6. BT Audio (A2DP)
Press MOD/(with green phone logo)
button, you could enter mode:
Radio/CD/AUX/BT Audio. BT Audio will
automatically play when you play the
song in the mobile phone. You could
pause by “ ” button, to choose up
and next song by pressing |<< and >>|
button.
7. Auto Connect
This unit support the “Auto Connect
function”. In case the connected mobile
phone is out of range (e.g. the user
leaves the car for lunch), when the
mobile phone is in the range again, the
unit will automatically connect with
the mobile phone so that you do not
have to set connection in the mobile
phone. If the auto connect does not
work, press the “Answer” button(with
green phone logo) so that the unit
will connect to the last device(mobile
phone).”Auto Connnect” requires the
function is enabled in your mobile
phone as well.
Bluetooth Operation
To Next Page
Loading...
