TEXA TMD MK0 - 10 Activation and Configuration; Activation through Mk3 Starter; Configuration through the Portal

10 ACTIVATION AND CONFIGURATION
In order to use the advanced functions of the device, you must activate it and then carry out a
configuration procedure.
10.1 Activation through MK3Starter
You can carry out the device's activation using the specific MK3Starter software.
The software consists of an app for Android devices that can be downloaded free of charge through
Play Store.
For a proper operation of the MK3Starter, the device the app is installed in must connect to the
Internet and be enabled to install apps coming from unknown creators.
The device can be configured at the end of the activation procedure.
For further information consult the MK3Starter operating manual.
10.2 Configuration through the Portal
The device can be configured remotely through the TMD portal.
The portal may be used to eventually correct wrong configurations.
The access to the configuration pages in the portal is linked to the rights granted to the user with
which you login.
For further information contact Technical Assistance.
23