11 MAINTENANCE
In order to guarantee a correct functioning of TMD MK0, you must perform regular checks on the
device.
We remind the operator to carry out the tests with the utmost care, making sure he is working in
total safety during all of the steps (see General Rules for the Safety of Operators in this manual,
also).
Maintenance interventions must be performed within 15 days from the installation of the
TMD MK0 and then every 6 months.
In particular:
•
Carry out a visual inspection of the installed device.
•
Check for possible damages to the device, wrongly fixed covers/plastic parts, cut-off and/or
damaged cables, unhooked and/or loose connectors.
•
Make sure the connections are not damaged, oxidised, exposed to atmospheric agents, water
and humidity.
•
Make sure TMD MK0 is fastened properly.
In case of damaged cables, contact TEXA S.p.A. in order to have them replaced.
For any fault or complication, contact the TEXA S.p.A. assistance service immediately.
24
To Next Page
Loading...
