2 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK0
The technology used for the design and manufacturing control of the TMD MK0 makes it a reliable,
simple and safe device to install and use.
The personnel in charge of installing the remote diagnostic tools are required to follow the general
safety regulations, to use TMD MK0 devices for their intended use only and to carry out
maintenance correctly as described in this manual.
All the requirements based on the following must be assessed and applied:
•
Labour inspectorate.
•
Trade associations.
•
Vehicle manufacturers.
•
Anti-pollution regulations.
2.1 Glossary
Operator: a qualified person responsible for installing the remote diagnostic device.
Device: any TMD MK0 device.
The definition of "operator" cannot be applied to minors or to people
with reduced physical, sensory or mental capabilities or without any
experience or knowledge required.
7
To Next Page
Loading...
