Texas Instruments CC110 Series User Manual

Design Note DN022
SWRA215E Page 7 of 8
3) In Register View, change the AGCCTRL2, AGCCTRL1, and AGCCTRL0 settings as
explained in Section 3.1. Make sure the FSCTRL1, FIFOTHR, FREND1, TEST2, and TEST1
registers are set as explained in Section 3.2. It is possible to print the register settings to a file
using “Export CC1101 Registers” under “File”. Press the “Write” button for the register to be
updated if SmartRF
®
Studio is being used to control a CC1101EM.

Texas Instruments CC110 Series Specifications

General

Brand	Texas Instruments
Model	CC110 Series
Category	Microcontrollers
Language	English