Texas Instruments MSP430x1xx - USART Peripheral Interface, SPI Mode; USART Introduction: SPI Mode; USART Operation: SPI Mode

14-1
USART Peripheral Interface, SPI Mode
!)"-
The universal synchronous/asynchronous receive/transmit (USART)
peripheral interface supports two serial modes with one hardware module.
This chapter discusses the operation of the synchronous peripheral interface
or SPI mode. USART0 is implemented on the MSP430x12xx, MSP430x13xx,
and MSP430x15x devices. In addition to USART0, the MSP430x14x and
MSP430x16x devices implement a second identical USART module,
USART1.
Topic Page
14.1 USART Introduction: SPI Mode 14-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.2 USART Operation: SPI Mode 14-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.3 USART Registers: SPI Mode 14-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 14