Texas Instruments MSP430x1xx - Page 414

ADC10 Registers
18-28
ADC10
ADC10DIVx
Bits
7-5
ADC10 clock divider
000 /1
001 /2
010 /3
011 /4
100 /5
101 /6
110 /7
111 /8
ADC10
SSELx
Bits
4-3
ADC10 clock source select
00 ADC10OSC
01 ACLK
10 MCLK
11 SMCLK
CONSEQx
Bits
2-1
Conversion sequence mode select
00 Single-channel-single-conversion
01 Sequence-of-channels
10 Repeat-single-channel
11 Repeat-sequence-of-channels
ADC10
BUSY
Bit 0 ADC10 busy. This bit indicates an active sample or conversion operation
0 No operation is active.
1 A sequence, sample, or conversion is active.
ADC10AE, Analog (Input) Enable Control Register
76543210
ADC10AE7 ADC10AE6 ADC10AE5 ADC10AE4 ADC10AE3 ADC10AE2 ADC10AE1 ADC10AE0
rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0)
ADC10AEx
Bits
7-0
ADC10 analog enable
0 Analog input disabled
1 Analog input enabled