Texas Instruments MSP430x1xx - Page 430

DAC12 Registers
19-12
DAC12
DAC12
AMPx
Bits
7-5
DAC12 amplifier setting. These bits select settling time vs. current
consumption for the DAC12 input and output amplifiers.
DAC12AMPx
Input Buffer Output Buffer
000 Off DAC12 off, output high Z
001 Off DAC12 off, output 0 V
010 Low speed/current Low speed/current
011 Low speed/current Medium speed/current
100 Low speed/current High speed/current
101 Medium speed/current Medium speed/current
110 Medium speed/current High speed/current
111 High speed/current High speed/current
DAC12DF
Bit 4 DAC12 data format
0 Straight binary
1 2’s compliment
DAC12IE
Bit 3 DAC12 interrupt enable
0 Disabled
1 Enabled
DAC12IFG
Bit 2 DAC12 Interrupt flag
0 No interrupt pending
1 Interrupt pending
DAC12
ENC
Bit 1 DAC12 enable conversion. This bit enables the DAC12 module when
DAC12LSELx > 0. when DAC12LSELx = 0, DAC12ENC is ignored.
0 DAC12 disabled
1 DAC12 enabled
DAC12
GRP
Bit 0 DAC12 group. Groups DAC12_x with the next higher DAC12_x. Not used for
DAC12_1 on MSP430x15x and MSP430x16x devices.
0 Not grouped
1 Grouped