EasyManua.ls Logo

Texas Instruments TravelMate 4000M - Level 3; Level 4; Configuration Power Savings

Texas Instruments TravelMate 4000M
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Startup Error Messages
No boot device
available - press F1
to retry boot
No boot sector on
fixed disk - Press F1
to retry boot
Non-System disk or
disk error. Replace
and press any key
when ready
Time-of-day not set
Press
F1
to try loading MS-DOS again.
Replace the floppy if you are loading MS DOS from
a floppy.
Press
Ctrl-Alt-Esc
to ensure that the drive type is
set correctly in Setup.
Press
F1
to try loading MS-DOS from the hard disk
again.
Load MS DOS from a floppy, and try to display a
directory of drive C. If you cannot display a
directory, the hard disk may need to be reformatted.
Caution: Reformatting erases all of the data
on the hard disk. Reformat your hard disk
only as a last resort.
Eject floppy from floppy drive, and press a key to
load MS DOS from the hard disk.
Insert a floppy containing MS-DOS in the floppy
drive, and press a key.
Press
Ctrl-Alt-Esc
to ensure that the drive type is
set correctly in Setup.
The battery sustaining the system configuration has
failed. Follow the procedure in this chapter to
restore the configuration.
6-5

Table of Contents

Other manuals for Texas Instruments TravelMate 4000M

Related product manuals