Using Disk Drives
Floppy Drive Guidelines
Failure to observe the following precautions can damage both the
floppy drive and the data on the floppy:
Insert the floppy into the floppy drive slot with the label side up and
the metal-shutter end first. Gently push the floppy into the floppy
drive slot until the floppy clicks into place.
To remove a floppy, press the eject button until the floppy pops out.
Never remove a floppy while the indicator on the floppy drive is on.
Never force open the access shutter on a floppy.
Always remove a floppy from the floppy drive
before
turning off the
computer.
Never transport the computer with a floppy in the floppy drive. Doing
so can damage the drive head.
If a floppy appears to be damaged, try to make a copy of it, and
immediately discard it.
Keep all floppies when not in use in a disk storage box to protect them
from damage or loss.
1-21
To Next Page
Loading...
