www.t
exas.dk
28
-
Always stop the engine and take off the lid of the spark plug before making
adjustments or repairs. Only exception
is when adjusting the carburetor.
-
Only use original spare parts. If not you may experience bad performance or injury
and the warranty is invalid.
!
Examine the tool for loose bolts and nuts, leakage etc. Replace any
damaged parts. Replace the trimmer head /
blade if it is cracked, chipped or
damaged in any other way.
!
Make sure that the trimmer head / blade is fitted correctly and securely
fastened. If not this may lead to serious personal injury.
!
Make sure that all safety guards and handles are correctly and
securely
fastened.
!
The cord head rotates while the carburetor is adjusted. Wear protection and
follow all safety instructions.
!
Let the engine cool off before storage.
!
Empty the fuel tank and fasten the brush cutter when it is transported.
1. B
lade
2. Shaft
3. Gas
4.
Starter
5. Safety switch
6.
V-
handle
7. Holder for harness
8. Air filter
9. Lid for fuel tank
10. Fuel tank
11. Primer
12. Choke
13. Safety guard
14. Knife
15. Trimmer head
To Next Page
Loading...
