Texas CG230B - Technical Specifications

www.t exas.dk
36
3. The line is worn short. Pull out more line while alternately pressing the
line head do wn and letting go.
4. The line is entangled. Remove the line from the spool and fit it again.
5. The rotations of the
engine are too slow.
Pull out more line at full speed.
1. Tall grass is cut at b ase. Cut the grass from the top and downwards. Grass is wrapped around
the gear head or line
head.
2. The trimmer is not used at
full speed.
Use the trimmer at full speed.
The spool head is difficult
to turn.
The threads are dirty,
damaged or full of grass.
Clean the threads and grease or change the spo ol
head. Remove any grass..
1. The trimmer is not used
on full power.
Use full power
2. Check the mix of the fuel. Use new fuel and correct two - stroke mix.
3. The air filter is dirty. Clean or replace.
Oil leaks from the
exhaust
4. The carburetor ne eds
adjustment.
Contact your local dealer.
14. Specifications
TYPE CG 230 B
Transmission Automatic centrifugal clutch
Reduction rate. 7:9
Handle V- handle
Machine
Net weight (kg) 5,4 kg
Engine name 1E31F
Carburetor Diaphragm type
Dis placement Volume cc 22,6 cc
Ignition Non - contact electronic ignition
Starter Recoil
Engine
Fuel Unleaded gasoline mixed with two - stroke oil.
Trimmerline (size) 2,4 mm
TYPE CG260 B
Connection Automatic centrifugal clutch
Reduction ability 17:22
Handle V- handle
Machine
Dry weight (kg) 6,2 kg
Engine name 1E34F
Carburettor Diaphragm type
Displacement Volume cc 26 cc
Ignition No switch electric ignition
Start Recoil
Fuel Unleaded octane 95, mixed with 2 - stroke oil.
Engine
Tank capac ity (L) 0,72
Trimmerline (size) 2,4 mm