16
OIL CHANGE
Remove the sparkplug cap
Change the oil, remove the drainscrew and drain the oil. Keep the oil in an approved
container.
Add new oil.
See fig 2, pos 3.
See section 4 for further descriptions.
STORAGE
Remove the sparkplug and pour max. 1 tablespoon of oil into the cylinder, mount the
sparkplug.
Do not mount the sparkplug cap. Pull the sparking cord, until there is resistance. This
will close the valves and protect them from rust.
Protect the rest with a thin layer of oil to avoid rust.
Store the engine in a dust free environment, out of reach of children.
Mount the sparkplug cap before use.
To Next Page
Loading...
