Texecom CAPTURE D20 User Manual

INS878EN-2 4/68
1.0 Quick installation
1.1 Opening the device
The devices are supplied in the unlocked position. If locked.
Use a flat bladed terminal driver and turn the locking mechanism ¼ turn anti-
clockwise.
Slide the front down and towards you to remove.
For ceiling mount devices remove the facia by turning it anti-clockwise, and
then unlock as above.
Locking Mechanism
Opening the device

Texecom CAPTURE D20 Specifications

General

Brand	Texecom
Model	CAPTURE D20
Category	Security Sensors
Language	English