INS876-1 3/15
1.0 Introduction
The Impaq SC-W is a wireless shock sensor with an on board magnetic contact. The
product can also be used with an externally wired magnetic contact and has an
additional facility for use with window shutter movement detectors.
When using Premier Elite Firmware Version 2.10 and above the dedicated
Ricochet learn menu can be accessed via the omit key when in the Engineers
menu. For all other firmware versions please refer to the Premier Elite 8XP-
W/32XP-W Installation Manual.
See the Premier Elite 8XP-W/32XP-W Installation Manual for details of how to
change the device attributes and learning.
Figure 1 shows the key parts of the device that are used for configuration.
Figure 1
To Next Page
Loading...
