Premier Elite ComIP Installation Manual
INS273-6 3
Typical WAN configuration
Supported Control Panels
The ComIP module is supported on the following Premier & Elite Series control panels, this manual
assumes use with Premier Elite panels:
• Premier 412/816 816 Plus & 832
• Premier Elite 12/24/48/88/168 & 640
• Premier 48/88/168 & 640 V7 or later
General
The installation of the ComIP module requires a basic understanding of networking and TCP/IP
protocol. If you are not familiar with these concepts, you may require assistance from an IT
professional before attempting to install the module.
The ComIP module is designed to be fitted inside the control panel and is powered via the harness
connection supplied.
To Next Page
Loading...
