Texecom Veritas 8 - User Manual

Security Control Panels
USER GUIDE
THANK YOU FOR VOTING TEXECOM

Texecom Veritas 8 Specifications

General

Zones	8
Tamper Proof	Yes
Part Set Facility	Yes
Part Set Suites	2
Remote Keypad Support	Yes
Expandable Zones	No
Power Supply	230V AC
Battery Backup	12V DC

Summary

Setting the System

To FULL Set the System

Procedure for setting the system to full armed state using a user code.

To PART Set the System

Procedure for setting the system to part armed state using a user code and part set suite.

To OMIT Zones During Setting

Procedure to exclude specific zones during the system setting process.

To Set the System With a Power Fault

Procedure to set the system during a power fault event.

To UNSET the System

To RESET During an Alarm Activation

To RESET After an Alarm Activation

If the System Requires an Anti-Code After an Alarm Activation

The CHIME Facility

To Program the Zones which CHIME

Procedure to select specific zones that will trigger a chime tone when entered.

To Turn CHIME On or Off

Procedure to enable or disable the chime function for selected zones.

To Test the Sounders and Strobe

To Display Log Events

To Walk Test the System

To Change Your Code

If Your System is Due for Maintenance

To Activate Keypad Personal Attack