Need help?Do you have a question about the Texecom Veritas R8 Plus and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Zones | 8 |
| Expandable Zones | No |
| Power Supply | 230V AC |
| Part Set Suites | 4 |
| Weight | 1.5 kg |
| Battery Backup | 12V 7Ah |
| Event Log | Yes |
| Programming | Via keypad |
| Communication | N/A (No onboard communicator) |
Ensures all zones are closed and sets the system using a 4-digit code and the FULL key.
Sets the system for a specific area by entering a code and selecting a part set suite.
Disables the alarm system by entering the premises via an entry route and inputting the code.
Allows exclusion or inclusion of individual zones during the system setting procedure.
Procedure to set the alarm system when a power fault is detected.
Silences sounders and stops strobes during an alarm by entering the system code.
Resets the system after an alarm has finished, requiring entry via an entry route and code.
Explains the process for obtaining and using an Anti-Code for system reset after an alarm.
Configures specific zones to produce a chime sound when triggered.
Enables or disables the chime function for programmed zones.
Tests the functionality of the internal sounder, external sounder, and strobe.
Recalls and displays the details of the last seven alarm activations.
Checks the operation of detection devices by triggering zones and observing system response.
Guides on how to change the existing user code for system access.
Provides information on system maintenance reminders and contacting the installer.
To Next Page
