Texecom Veritas R8 - User Manual

Security Control Panels
USER GUIDE
THANK YOU FOR VOTING TEXECOM

Texecom Veritas R8 Specifications

General

Zones	8
Tamper Protection	Yes
Power Supply	230V AC
Keypad	LED keypad
Part Set Suites	2
User Codes	6 user codes
Event Log	No

Summary

Setting the System

To FULL Set the System

Ensures all zones are closed, enters 4-digit code, presses FULL for exit tone.

To PART Set the System

Ensures zones are closed, enters code, presses Part Set Suite number and PART for exit tone.

To UNSET the System

To OMIT Zones During Setting

To Set the System With a Power Fault

To RESET During an Alarm Activation

To RESET After an Alarm Activation

If the System Requires an Anti-Code After an Alarm Activation

The CHIME Facility

To Program the Zones which CHIME

Enter code, press, select zones, press PROG. to turn Chime on or RESET to turn off.

To Turn CHIME On or Off

To Test the Sounders and Strobe

To Display Log Events

To Walk Test the System

To Change Your Code

If Your System is Due for Maintenance

To Activate Keypad Personal Attack