Texi Smart S+B User Manual

TEXI SMART S+B 7
RESET OF WARNINGS is necessary in order to delete the warnings from the display once the cover
has been changed.
Example: WARNING: CHANGE COVER is displayed.
1. Access the MENU
2. find RESET WARNINGS, press OK and find CHANGE COVER
3. press RESET until you hear an acoustic signal
4. ESC to exit the SET menu.
KEY TONE
KEY TONE ON
To confirm
To exit
or wait for 5
seconds
ON/OFF
KEY TONE OFF
KEY TONE is used to activate or deactivate the acoustic signal when keys are pressed.
If you wish the acoustic signal to be deactivated, press KEY TONE OFF.
MAINTENANCE
Password needed. Service Centre authorized access only
MANUFACTURER
Password needed. Manufacturer authorized access only
WARNING: AFTER 10 ATTEMPTS TO ACCESS THE “MAINTENANCE” OR
“MANUFACTURER” MENU WITHOUT TYPING IN THE PASSWORD, AND/OR EVERY TIME
THE WRONG PASSWORD IS TYPED, THE MENU WILL BE BLOCKED. “PASSWORD
BLOCKED” will be displayed. To unblock the menu, contact the Authorized Service Centre or the
manufacturer.
LANGUAGE
ITALIAN
To confirm language
To exit
or wait for 5
seconds
ENGLISH
GERMAN
FRENCH
POLISH
RESET OF
WARNINGS
CHANGE COVER
(the number of hours
elapsed since the last
change will be displayed)
To zero, press the key
until you hear an
acoustic signal
To exit press
or wait for 5
seconds

Texi Smart S+B Specifications

General

Brand	Texi
Model	Smart S+B
Category	Iron
Language	English