Texi Smart S+B User Manual

TEXI SMART S+B 8
ON/OFF
RUSSIAN
LANGUAGE allows to set operating language (see table). Languages may be different according to
the country of destination.
DELAY
DELAY
ON
0...12
seconds
To confirm
To exit
or wait for 5
seconds
ON/OFF
DELAY
OFF
ON/OFF
DELAY works only in the automatic mode. You can set the vacuum / blowing motor on delay (DELAY
ON) as well as off delay (DELAY OFF), in the range from 0 to 12 seconds. The settings are saved in
the memory. You can change the values according to your requirements.
The factory settings are: delay of the motor on – 2 seconds, delay of the motor off – 6 seconds.
7. WARNING LIGHT AND SOUND ALARM SIGNAL
The intermittent warning light , the sound alarm
signal with quick intermittency and the written warning
“WATER” are activated when there is no water inside the
water tank. Upon refilling the water tank the light and
sound alarm signal will switch off.
The fixed warning light together with , the
sound alarm signal with slow intermittency and the
written warning “WATER PUMPING” are activated: to
indicate a malfunction of Texi Smart S+B (the boiler is
without water and it is not possible to restore the correct
water level). In this case turn off the boiler and then turn it
on once again. If the warning light does not turn off - do
not insist, unplug the Texi Smart S+B from the mains and
contact authorized personnel.
WATER FILLING
Fig. 3

Texi Smart S+B Specifications

General

Brand	Texi
Model	Smart S+B
Category	Iron
Language	English