BHT-412-MM-2
5-00-00
26 FEB 2013 Rev. 16 Page 85
Export Classification C, ECCN EAR99
Chapter 71 2. No. 2 (right) engine power section:
a. Chip detectors for debris.
b. Clean chip detectors.
c. Test chip detector electrical circuits.
Chapter 71 3. Reduction (combining) gearbox:
a. Chip detector for debris.
b. Clean chip detector.
c. Test chip detector electrical circuits.
Chapter 71 4. Engine electrical connections:
a. Power section 1 ignition leads for corrosion, chafing,
and security.
b. Power section 2 ignition leads for corrosion, chafing,
and security.
Chapter 71 5. Starter generator:
a. Power section 1 starter generator brushes for
allowable wear.
b. Power section 2 starter generator brushes for
allowable wear.
c. Power section 1 starter generator cooling ducts for
obstruction, kinking, and security.
d. Power section 2 starter generator cooling ducts for
obstruction, kinking, and security.
If applicable, refer to BHT-412-SI-87 for installation
of adjustable seals or refer to Chapter 71 for seal
adjustment.
5-10. 300 HOUR/12 MONTH INSPECTION — PART B (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...