BHT-412-MM-2
Export Classification C, ECCN EAR99
5-00-00
(3) If inspection of the tail rotor output quill assembly
reveals discrepancies, or gear contact with sump case is
evident, remove transmission assembly and an overhaul
evaluation of the sump case assembly shall be performed.
Make an entry in component record to show reason for removal
was blade strike or torque spike.
3. Install or replace, as applicable, all removed components
with like serviceable components.
4. Refer to applicable Pratt & Whiney Canada Engine
Maintenance Manual for sudden stoppage inspection
requirements for the engine.
5-38. SUDDEN STOPPAGE — POWER ON OR OFF (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
Page 202B Rev. 26 01 JUN 2018
To Next Page
Loading...