Textron Greenlee 1818 - Page 5

Greenlee / A Textron Company 5 4455BoeingDr.•Rockford,IL61109-2988USA•815-397-7070
1818 Mechanical Bender
5. Placetheconduitinthebenderasshownonthe
shoeandalignbendingmarkswiththefrontedgeof
thehook.
Note: Set the pointer on zero, with the conduit
snug against the shoe hook. The indicator does not
compensate for spring-back.
7. Ratchetthebendingshoetothedesiredangle,as
shownbythedegreeanglepointer.
6. Lowertheratchethandletothehorizontalposition,
thenrotatethebendcontrolhandletotheBEND
position.
Instructions for Bending (cont’d)
5
6
POINTER